sábado, 21 de junho de 2014

Canteiro de Calhas dágua Recicladas - Flower Bed Rails Dágua Recycled

Olá Amigos que curtem nosso blog!
Hello Friends who enjoy our blog! Under an English version, translated via google translate.

Hoje vai uma dica de como fazer um canteiro com sobras de reformas, no nosso caso em especial se utilizando de calhas velhas.
A vantagem de se fazer um canteiro com calhas é que ela não enferruja e você pode fazer vários andares de canteiros.

Sempre estamos vendo jogadas por nas caçambas de coleta de lixo pedaços de calhas.

É extremamente simples de se fazer e instalar.

Vamos ao que interessa, mãos a obra:

Materiais:
01 - Pedaço de calha usada;
02 - Mão-Francesa (no mínimo 2, conforme o tamanho necessitará de mais);
08 - Jogo de parafuso e bucha ( sugiro usar a número S-8);
01 - Pedaço de tela ou tecido grosso;
E bastante terra adubada para preencher a calha.

Ferramentas:
01 - Furadeira;
01 - Chave de fenda ou philips (depende do parafuso que escolher);
01 - Nível de bolha (não é obrigatório, só para deixar bem nivelado);
01 - Prego (para fazer uns furos na calha);
01 - Martelo;

Mão na massa:

É muito fácil, primeiro, escolha  a altura que deseja para o seu canteiro;
Fixe a primeira mão-francesa: Marcar os locais dos buracos, fazer os furos com a broca e depois fixar a mão-francesa.
Com o nível, nivelar a segunda mão-francesa e também fixa-lá.
Dica: a distância entre as mãos-fracesas pode ser de até uns dois metros de vão, caso sua calha seja grande, ou deixe uns 30 cm de cada lado.
Faça muitos furos na parte de baixo da sua calha e também na lateral que irá ficar do lado do muro e fixe com os parafusos.
Apoie a calha sobre as mãos-francesas e a fixe na parede conforme os furos que você fez.
Pronto. Fácil não?

Agora preencha com terra e plante o que mais lhe agradar, no meu caso serão plantadas algumas hortaliças.

Deixem sua opinião, isso é muito importante para nós.

Abaixo fotos com o passo a passo.

Abraços a todos!

César H. Zanatto
#canteirosuspenso #canteirocomcalhas #oquefazercomcalhasvelhas

Today's a tip on how to make a bed with leftover reforms, especially in our case using old rails.
The advantage of making a bed with rails is that it does not rust and you can make several floors of beds.

We are always looking for games in buckets to collect pieces of trash chutes.

It is extremely simple to make and install.

Cut to the chase, get to work:

Materials:
01 - Piece of rail used;
02 - Hand-French (at least 2 as the size will need more);
08 - Set of screw and bushing (I suggest using the number S-8);
01 - Piece of fabric or scrim;
And the earth fertilized enough to fill the trough.

Tools:
01 - Drill;
01 - or philips screwdriver (depends Screw you choose);
01 - Bubble level (not mandatory, just to make it level);
01 - Nail (to make a hole in the pipeline);
01 - Hammer;

Hands-on:

It is very easy, first select the time you want for your building;
Attach the first-hand French: Mark the locations of the holes, drilling holes with the drill and then attach the hand-French.
With level, even the second-hand French and also fixed there.
Hint: the distance between the hands-fracesas can be up to six feet go if your gutter is large, or leave about 30 cm on each side.
Make lots of holes in the bottom of your gutter and also the side that will be on the side of the wall and attach with screws.
Support the chute on hands-French and fix the holes in the wall as you did.
Ready. Easy no?

Now fill with soil and plant the one that you want, in my case will be planted some vegetables.

Let your opinion, it is very important to us.

Below photos with step by step.

Hugs to all!

Cesar H. Zanatto
Fixando a mão-Francesa. Attaching the Hand-French






Colocando uma tela para tampar os buracos maiores Putting a screen to plug larger holes

Já fixado e com terra. Already fixed and earth.