sábado, 15 de outubro de 2016

Painéis com Paletes Usados Reciclados - Panels Pallets Used Recycled

Olá amigos do blog!

The friends accompanying the blog outside the country below a translation via GoogleTranslate.

Essa semana tivemos uns feriados mais prolongados aqui na minha cidade e acabei dando mais uma organizada tanto no quintal quanto no escritório.
Aqui começaram as chuvas e então nada como dar uma geral no quintal para não acumular água.

Mas chega de papo, ninguém vem aqui para escutar a previsão do tempo - HAHHAHAH.

O que fiz:
Peguei duas peças de paletes sem os pés (tirando a parte de baixo onde ficam os pés), escolhi um e minha filha o outro.
Primeiro dei uma lavada (estavam um pouco sujos por estarem no tempo);
Dei uma lixada nas duas com lixadeira e com a lixa manual;
Ajustei os cantos com a serra circular.

Peguei um verniz marítimo que tinha e apliquei apenas uma de mão, pois os painéis irão ficar dentro de casa e não queria tirar os detalhes da madeira surrada pelo sol.

Após fixa-los em seus locais, podemos agora enche-los de pregos e parafusos sem se preocupar em estragar a parede - hehehhe.

No meu caso, cuidei dos finalmentes referentes ao painel que coloquei no escritório.

Com isso ganho mais espaço livre na mesa (que também é reciclada e feita de uma porta de divisória).

Primeira providência foi fixar uma régua de tomadas, segunda, colocar alguns pregos para pendurar os badulaques e terceira foi colocar uns vasilhames de óleos de 1 litro usados em automóveis.

Pelas fotos vocês irão verificar que os cortes feitos nos vasilhames variam de acordo com seu uso.

Espero que curtam as dicas, muito fácil e simples de fazer.

Grande abraço a todos.

César H. Zanatto

Seguem algumas fotos:
Escolhendo os paletes

Envernizando

Já envernizado

Quarto da filha já sendo decorado

Os vasilhames de óleo já lavados


Cortando os vasilhames

Cortando conforme a sua futura utilização

Ajustando os locais onde pregar

Já pregados um pouco acima da mesa, para não atrapalhar





Hello blog friends!

This week we had more long holidays here in my city and I ended up giving more organized both in the yard and in the office.
Here the rains started and then nothing like giving a general in the backyard to not accumulate water.

But enough talk, no one comes here to listen to the weather forecast - HAHHAHAH.

What did I do:
I took two pieces of pallets without feet (apart from the bottom where the feet are), chose one and my daughter the other.
First gave a clean (they were a little dirty for being on time);
I took a sanded on both with sander and sanding manual;
I adjusted the corners with the circular saw.

I grabbed a marine varnish that was applied and only one hand, because the panels will stay inside and did not want to take the details of battered wooden sun.

After setting them on their sites, we can now fills them with nails and screws without worrying about spoiling the wall - hehehhe.

In my case, I took care of finalmentes for the panel put in office.

With that gain more free space on the table (which is also recycled and made of a dividing door).

First step was to fix a power strip, second, put some nails to hang trinkets and third was to put some bottles of 1 liter of oil used in automobiles.

From the pictures you will see that the cuts made in the containers vary according to their use.

I hope you enjoy the tips, very easy and simple to do.

Big hug to everyone.

César H. Zanatto
Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Mark

sexta-feira, 14 de outubro de 2016

Vidros e Potes suspensos - Glasses and suspended Potes

Olá Amigos que curtem nosso blog!

Friends outside of Brazil below a translation into English via GoogleTranslate!

Hoje vou dar mais uma dica de como aumentar o espaço do seu escritório (em casa).

Como eu basicamente trabalho em casa, fiz as minhas mesas com portas velhas jogadas e as estantes são de mdf de portas de guarda-roupas fixadas com correias de motor de carro (já fiz uma postagem sobre elas).

Agora o espaço ficou mais curto e pouco na mesa, ai lembrei de um filme que assisti a alguns anos onde o avô do personagem principal tinha no celeiro um monte de potes de vidro presos pelas tampas na estante, achei genial e resolvi imitar.

Muito simples de fazer, abaixo vou dar as dicas.

Material:
Potes com tampas - pode ser de plástico ou vidro, Aqui gosto dos da nutela (a tampa agarra bem) e os demais são de palmito (quando ganho - HAHAHHA) e 90% de azeitonas.

Não aconselho usar potes de plástico onde a tampa não é de rosca e não fixa bem, eles podem cair.

Parafusos para mdf (são uns parafusos de "aspas" grandes e fixam bem na madeira). Aqui recomendo no mínimo dois, se a tampa for de exemplo de azeitona de 500g.
Caso a tampa seja maior, colocar mais.
Modo de pregar os parafusos:
02 - Divida o meio da tampa em dois e pregue nas extremidades (cuidado para não fixar muito perto da beirada que pode prejudicar o fechamento).
03 - Faça uma espécie de triângulo equilátero (com os lados iguais) e assim sucessivamente vá dividindo os espaços de maneiras iguais para a quantidade de parafusos que for colocar.

Ferramentas:
01 - Chave Philips (caso o parafuso usado for o que recomendei), caso contrário ver o que irá utilizar;
01 - Parafusadeira (caso tenha uma uma substitui a chave acima);
01 - Prego médio e
01 -  Martelo.
Os dois últimos utilizo para fazer o furo na tampa de lata antes de pregar.

MODUS OPERANDI:
Primeiro fure as tampas dos potes conforme a quantidade de parafusos que for utilizar (tem a dica acima), para isso utilize o prego e o martelo;
É interessante na hora que for colocar na prateleira que de uma batida com o prego no local para fazer um pequeno buraco para o parafuso começar a pegar a rosca. Tem alguns MDF revestidos que são duro de começar a parafusar sem quebrar a camada do revestimento.

Por fim parafuse até o final, não deixando jogo (folga) entre a tampa e a prateleira.

Vocês vão ver que ficou muito legal a minha mesa do escritório de casa.

Se quiser, pode colocar etiquetas marcando o que tem dentro, no meu caso como são potes transparentes não precisei colocar.

DICA DA ETIQUETA:
Para que ela fique em um local legal e de fácil visualização faça o seguinte:
Coloque o pote no lugar, rosqueando até o final;
Pregue a etiqueta no local desejado.
Isso ira fazer com que toda a vez que fechar o pote a etiqueta fique sempre no mesmo lugar.

Espero que tenham gostado da dica.
Curtam nossa postagem, fazemos isso porque amamos a reciclagem.
Visitem nossa página do face: www.facebook.com/DecoracaoABaseDeLixo.

Grande abraço.

César H. Zanatto
Potes já pregados

Fazendo os furos nas tampas




Fixando as tampas

As tampas pequenas apenas dois, as maiores com mais parafusos

Hello Friends who enjoy our blog!

Today I will give one more tip on how to increase the space of your office (at home).

As I basically work at home, I made my tables with old plays doors and shelves are mdf wardrobes doors secured with car engine components (already made a post about them).

Now the space was shorter and less on the table, there remembered a movie I watched a few years where the main character's grandfather had in the barn a lot of glass jars arrested by caps on the shelf, I found brilliant and decided to imitate.

Very simple to do, below I will give tips.

Material:
Pots with lids - can be plastic or glass, here taste of the nutela (the cover grabs as well) and the others are palmetto (when gain - Hahahha) and 90% of olives.

I do not advise using plastic pots where the lid is not thread and not fixed well, they may fall.

Screws MDF (are a screw "quotes" large and well set on wood). Here recommend at least two, if the lid is 500g olive example.
If the cover is greater, put more.
Way to preach the screws:
02 - Divide the middle of the lid in two and preach the ends (careful not to set too close to the edge that can damage the lock).
03 - Write a kind equilateral triangle (with sides equal), and so check dividing spaces ways equal to the number of bolts is put.

Tools:
01 - Phillips screwdriver (if the screw used is that recommended), otherwise see what will use;
01 - Screwdriver (if you have a one replaces the key above);
01 - Average Nail and
01 - Hammer.
The last two I use to make the hole in the can lid before nailing.

Modus Operandi:
First pierce the covers of the pots as the number of screws that you use (has the tip above), for this use the nail and the hammer;
It is worth the time it is put on the shelf of a hit with the nail in place to make a small hole for the screw to start picking up the thread. It has some coated MDF that are hard to get the screw without breaking the coating layer.

Finally screw until the end, leaving no play (looseness) between the cover and the shelf.

You will see that was really cool my desk home office.

If you want, you can put labels marking what's inside, in my case they are transparent pots did not have to put.

TIP OF THE LABEL:
So that it is in a nice and easy viewing spot do the following:
Place the pot in place, threading to the end;
Preach the label at the desired location.
This will cause every time you close the jar label always stay in the same place.

I hope you enjoyed the tip.
Curtam our post, we do it because we love recycling.
Visit our face: www.

Big hug.

César H. Zanatto